View HIH100_4508444.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

H HiTRON
AUTO-RANGING INPUT AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES HIH100 & HVI100 SERIES
FEATURES:
AUTO-RANGING ACCOMMODATE AC SOURCES BOX OR L-BRACKET FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Auto-ranging 115(90-132) Vac and 230(180-264) VAC. Transient threshold 150Vac typical. (Option for dual input selectable) Input Connector: See Pin assignment. Input Frequency: 47-63Hz. Inrush Current: Typ. 20A@115Vac, 40A@230Vac. Input Current: 2.5A @115Vac, 1.1A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 22mS @115Vac, 27mS @230Vac. Earth leakage: Typ. 0.5mA @230Vac. Power Fail Signal: Installed. Logic Inhibit: Optional in HIH100-1X and HVI100-2X dual output series.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 100 watts. Output Connector: See pin assignment. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. 1.0%. Aux. VO2 typ. 2.0%. (Magnetic Amp.) Aux. VO2 typ. 5.0%. (Stacked-on.) Aux. VO3/VO4 typ. 1.5%. (P.R.) Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main VO1. Adjustability: Available at VO1 & VO2. Remote Sense: Optional in HIH100 & HVI100-2X. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 75%. Switching Frequency: Fixed-frequency at 100K Hz. Circuit Topology: Fixed-frequency forward circuit. Transient Response: Output voltage returns in less than 3ms following a 25% load change. Safety Standard: UL 60950-1/EN 60950-1 Class I. Power Density: 1.56Watts / Cubic Inch. Operating Temperature: 0 to +50C under forced air flow for full load. Storage Temperature: -20 to +85C. Temperature Coefficient: Typ. 0.04% /C. Cooling: Recommended 20cfm cooling fan for full rating load. Construction: Enclosure box or L-bracket format.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
For the details of safety approval, please consult the factory.
-27-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO.
DUAL OUTPUT
MODEL NO. HVI100-20 HVI100-21 HVI100-22 HVI100-23 HVI100-24 HVI100-25 HVI100-26 AUX. VO2 Typ. Peak Volt. 3.0A +12V 5.0A 3.0A +12V 5.0A 1.5A +24V 2.5A 3.0A +15V 5.0A MAIN VO1 @ Typ. Volt. 15.0A 5V 10.0A 5V 10.0A 5V 6.0A 5V 4.5A 12V 3.5A 15V 15.0A 5V AUX. VO3 Typ. Volt. 0.8A 12V 0.8A 5V 0.8A 12V 0.3A 15V # Peak 20.0A 15.0A 15.0A 12.0A 6.0A 4.0A 20.0A AUX. VO2 @ Typ. Peak Volt. 6.0A 5.0A 5.0V 6.0A 4.0A 12.0V 4.0A 3.0A 15.0V 3.0A 24.0V 3.0A 4.5A 12.0V 6.0A 4.0A 3.4A 15.0V 6.0A 8.0A 3.3V
HIH100-10 HIH100-11 HIH100-12 HIH100-13 HIH100-14 HIH100-15
MAIN VO1 @ # Peak Typ. Volt. 20.0A 5V 25.0A 8.3A 12V 11.0A 6.7A 15V 10.0A 4.2A 24V 6.0A 3.6A 28V 5.0A 3.2A 2.2A 36V
TRIPLE OUTPUT
MODEL NO. HVI100-30 HVI100-31 HVI100-32 HVI100-33 MAIN VO1 @ Peak Typ. Volt. 12.0A +5V 15.0A 15.0A 12.0A +5V 12.0A +5V 15.0A 15.0A 12.0A +5V Peak 1.0A 1.0A 1.0A 1.0A
QUAD OUTPUT
MODEL NO. HVI100-40 HVI100-41 HVI100-42 HVI100-43 MAIN VO1 @ Typ. Peak Volt. 12.0A +5V 15.0A 12.0A +5V 15.0A 12.0A +5V 15.0A 12.0A +5V 15.0A AUX. VO2 Typ. Peak Volt. 2.5A +12V 4.0A 2.5A +12V 4.0A 1.0A +24V 2.0A 2.2A +15V 4.0A AUX. VO3 Typ. Volt. 0.8A 12V 0.8A 5V 0.8A 12V 0.6A 12V Peak 1.0A 1.0A 1.0A 1.0A AUX. VO4 Typ. Volt. 0.5A 12V 0.6A 5V 0.5A 12V 0.4A 15V Peak 1.0A 1.0A 1.0A 1.0A
Symbol: " " OVP built-in. "@" Adjustable. "" Floating(or isolated) output. "" Stacked on main output. " " Installed with Post Regulator (P.R.). "" Remote sensing. "" Installed with magnetic amplifier. "" Positive or Negative selectable (factory set). Remark: (1) At least 20% of typical main output current is required to maintain stated regulations. (2) Peak output, less than 60sec. with 10% duty cycle. (3) Max. current can't be drawn from all output at the same time.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 860.0g (30.3 Oz.)
PIN ASSIGNMENTS:
PIN # P1-L P1-N P1-G HIH100 HVI100 HVI100 -1X -2X -3X L L L N N N G G G HVI100 -4X L N G
P2-1 PFS P2-2 -VO1 P2-3 -VO1 P2-4 +VO1 P2-5 +VO1 P2-6 N.A. P2-7 N.A. P2-8 N.A. P3+S + SEN P3- S - SEN P4+I + INHIB P4 -I - INHIB
PFS PFS PFS - VO2 VO1 VO1 +VO2 VO1 VO1 +VO1 DC COM. DC COM. - VO1 DC COM. DC COM. N.A. VO2 VO2 N.A. VO3 VO3 N.A. N.C. VO4 + SEN N.A. N.A. - SEN N.A. N.A. + INHIB N.A. N.A. - INHIB N.A. N.A.
MATING CONNECTOR: P3 MOLEX 5051 series P4 MOLEX 5051 series.
-28-

▲Up To Search▲

Price & Availability of HIH100

	To Download HIH100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .